Hi Ludovic, The switch was not added with /32 as seen below; [image: image.png] [image: image.png]
Or what exactly is being referred to? On Thu, 3 Jun 2021 at 21:08, Zammit, Ludovic <luza...@akamai.com> wrote: > Don’t add your switch with /32, clone it and remove /32 and try again. > > Thanks, > > *Ludovic Zammit* > *Product Support Engineer Principal* > *Cell:* +1.613.670.8432 > Akamai Technologies - Inverse > 145 Broadway > Cambridge, MA 02142 > Connect with Us: <https://community.akamai.com> <http://blogs.akamai.com> > <https://twitter.com/akamai> <http://www.facebook.com/AkamaiTechnologies> > <http://www.linkedin.com/company/akamai-technologies> > <http://www.youtube.com/user/akamaitechnologies?feature=results_main> > > On Jun 3, 2021, at 12:16 PM, Ezeh Victor <vickeyzed...@gmail.com> wrote: > > Hi Ludovic, > > That feature is now turned on as seen below; > <image.png> > > httpd.aaa and radiusd-auth services were restarted after this > > But the error still persists but with a different log message: > > > *Jun 3 17:10:55 IKJDC-PRD-PKF01 auth[12075]: [mac:] Rejected user: > ciscopiJun 3 17:10:55 IKJDC-PRD-PKF01 auth[12075]: (1290157) Rejected in > post-auth: [ciscopi] (from client 172.29.1.16/32 > <https://urldefense.com/v3/__http://172.29.1.16/32__;!!GjvTz_vk!ABP6xJ_ORORRZQcQvDk11-8j2qlOKG3QFWJKt0PrunEwkdA2J6CnVWhKfD_IBw$> > port 1)Jun 3 17:10:55 IKJDC-PRD-PKF01 auth[12075]: (1290157) Login > incorrect (rest: Server returned:): [ciscopi] (from client 172.29.1.16/32 > <https://urldefense.com/v3/__http://172.29.1.16/32__;!!GjvTz_vk!ABP6xJ_ORORRZQcQvDk11-8j2qlOKG3QFWJKt0PrunEwkdA2J6CnVWhKfD_IBw$> > port 1)* > > > On Thu, 3 Jun 2021 at 17:03, Zammit, Ludovic <luza...@akamai.com> wrote: > >> It says that the CLI Radius login is not permitted, did you check the box >> on the switch config in PF ? >> >> <PastedGraphic-4.tiff> >> >> Thanks, >> >> *Ludovic Zammit* >> *Product Support Engineer Principal* >> *Cell:* +1.613.670.8432 >> Akamai Technologies - Inverse >> 145 Broadway >> Cambridge, MA 02142 >> Connect with Us: <https://community.akamai.com/> >> <http://blogs.akamai.com/> >> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!ABP6xJ_ORORRZQcQvDk11-8j2qlOKG3QFWJKt0PrunEwkdA2J6CnVWhRP_okcg$> >> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!ABP6xJ_ORORRZQcQvDk11-8j2qlOKG3QFWJKt0PrunEwkdA2J6CnVWgD_Sro-w$> >> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!ABP6xJ_ORORRZQcQvDk11-8j2qlOKG3QFWJKt0PrunEwkdA2J6CnVWgkxfneBA$> >> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!ABP6xJ_ORORRZQcQvDk11-8j2qlOKG3QFWJKt0PrunEwkdA2J6CnVWgMOOHD4w$> >> >> On Jun 3, 2021, at 11:27 AM, Ezeh Victor <vickeyzed...@gmail.com> wrote: >> >> Hi Ludovic, >> >> Kindly find errors below; >> >> Packetfence.log: *packetfence_httpd.aaa: httpd.aaa(10470) WARN: >> [mac:a8:51:5b:c8:3f:67] CLI Access is not permit on this switch 172.29.1.16 >> (pf::radius::switch_access)* >> <image.png> >> >> Radius.log: >> *Jun 3 16:11:56 IKJDC-PRD-PKF01 auth[12075]: (1286075) rest: ERROR: >> Server returned:* >> >> >> >> *Jun 3 16:11:56 IKJDC-PRD-PKF01 auth[12075]: (1286075) rest: ERROR: >> {"control:PacketFence-Authorization-Status":"allow","Reply-Message":"CLI or >> VPN Access is not allowed by PacketFence on this switch"}Jun 3 16:11:56 >> IKJDC-PRD-PKF01 auth[12075]: [mac:] Rejected user: ciscopiJun 3 16:11:56 >> IKJDC-PRD-PKF01 auth[12075]: (1286075) Rejected in post-auth: [ciscopi] >> (from client 172.29.1.16/32 >> <https://urldefense.com/v3/__http://172.29.1.16/32__;!!GjvTz_vk!GSKYmLR2pndwTcTNvoM4939F7-2D21WD6V-lOVsf2R1oqIU8cT7Qr3fWyaHsMg$> >> port 1)* >> <image.png> >> >> >> From the radius logs, it seems the switch is not accepting access via CLI >> and it needs to be enabled from Packetfence. >> >> I have reviewed the configuration on the switch section in PacketFence >> and also added the credentials for login to the CLI tab and yet I receive >> the same error message. >> >> On Wed, 2 Jun 2021 at 19:07, Zammit, Ludovic <luza...@akamai.com> wrote: >> >>> Hello Victor, >>> >>> It’s probably an authentication issue, check in the radius.log and >>> packetfence.log for errors. >>> >>> The password need to be sent in clear from the switch to PF. >>> >>> Thanks, >>> >>> *Ludovic Zammit* >>> *Product Support Engineer Principal* >>> *Cell:* +1.613.670.8432 >>> Akamai Technologies - Inverse >>> 145 Broadway >>> Cambridge, MA 02142 >>> Connect with Us: <https://community.akamai.com/> >>> <http://blogs.akamai.com/> >>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!GSKYmLR2pndwTcTNvoM4939F7-2D21WD6V-lOVsf2R1oqIU8cT7Qr3cZeoA23A$> >>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!GSKYmLR2pndwTcTNvoM4939F7-2D21WD6V-lOVsf2R1oqIU8cT7Qr3dO9Maypw$> >>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!GSKYmLR2pndwTcTNvoM4939F7-2D21WD6V-lOVsf2R1oqIU8cT7Qr3dguSc2cg$> >>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!GSKYmLR2pndwTcTNvoM4939F7-2D21WD6V-lOVsf2R1oqIU8cT7Qr3dItV6Kog$> >>> >>> On Jun 2, 2021, at 11:50 AM, Ezeh Victor <vickeyzed...@gmail.com> wrote: >>> >>> Hi, >>> >>> Thank you for your email. >>> >>> I tried out that command and retried access but this is the error I >>> received; >>> >>> <image.png> >>> >>> The ciscopi account is a locally created account on PacketFence with an >>> action set to Admin Role *CLI Switches* that was created within Admin >>> Access - (CLI Read and CLI Write). >>> >>> Does the software image running on the switch also affect this funtion? >>> >>> On Wed, 2 Jun 2021 at 11:46, Quiniou-Briand, Nicolas < >>> nquin...@akamai.com> wrote: >>> >>>> Hello, >>>> >>>> >>>> >>>> Could you try to add following commands in switch configuration: >>>> >>>> >>>> >>>> #v+ >>>> >>>> conf t >>>> >>>> aaa authorization exec default group packetfence local >>>> >>>> #v- >>>> >>>> >>>> >>>> I recently worked with Cisco IOS XE Software, Version 16.09.05 and this >>>> step was mandatory. >>>> >>>> Without this line, it was possible to connect to switch but user get >>>> privilege 1. If you try to use “enable”, it doesn’t work. >>>> >>>> >>>> >>>> *Nicolas Quiniou-Briand* >>>> *Product Support Engineer* >>>> >>>> <image001.png> >>>> >>>> *Office:* +33156696210 >>>> >>>> Akamai Technologies >>>> 145 Broadway >>>> Cambridge, MA 02142 >>>> >>>> Connect with Us: >>>> >>>> <image002.jpg> <https://community.akamai.com/> <image003.png> >>>> <http://blogs.akamai.com/> <image004.png> >>>> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!Gma_IAPl6qJeAvlr8GwY3vxTjN3I4UloaBaougPxCIcekFdN-OhAMsonEWpNFQ$> >>>> <image005.png> >>>> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!Gma_IAPl6qJeAvlr8GwY3vxTjN3I4UloaBaougPxCIcekFdN-OhAMsoPTpAoDA$> >>>> <image006.png> >>>> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!Gma_IAPl6qJeAvlr8GwY3vxTjN3I4UloaBaougPxCIcekFdN-OhAMsqZZ_gRXg$> >>>> <image007.png> >>>> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!Gma_IAPl6qJeAvlr8GwY3vxTjN3I4UloaBaougPxCIcekFdN-OhAMsrplQlfuA$> >>>> >>>> >>>> >>> >>> >> >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
