Hello listmates! Can someone help me
My situation is when i plug windows 10 4 computers in hub which connect in switchport where is packetfence working there is not working 802.1x. I see only one ethernet-noeap connection log for every 4 computer. Computers previously registered so they connect to network via mab and in the logs shows auth status accept and node status registered. If i plug not previously registered device in logs i see auth status accept and node status unregistered How to register devices(computer) via 802.1x connected to hub? Please help me!!!!!!! Switchport config interface GigabitEthernet1/0/43 switchport mode access switchport access vlan (My vlan number) authentication host-mode multi-auth authentication order dot1x mab authentication priority dot1x mab authentication port-control auto authentication periodic authentication timer restart 10800 authentication timer reauthenticate 10800 mab no snmp trap link-status dot1x pae authenticator dot1x timeout quiet-period 2 dot1x timeout tx-period 3 end [image: image.png] Best regards!!!
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
