Hi I am using this port configuration mentioned below. I expected dot1x authentication not mab
But what happend is when system on and user login with his credentials two request come to pf first one is mab then It gets registered and dot1x request come so now its gets reg again get vlan but at same time bcoz of mab request its gets unreg but unreg state shows only in node . No reauth promt come nothing it remain login If i comepletly remove mab configuration from port configuration single dot1x come it works fine but what I don’t understand is I mentioned using dot1x order first And one thing happend again is that if user shut his system a mab request again come from system side in logs I tried changing dot1x tx period to 3 to 60 but no result to delay fall back mechanism switchport mode access switchport voice vlan xxx ip flow monitor SMC-flow-monitor input ip device tracking maximum 10 authentication host-mode multi-auth authentication order dot1x mab authentication priority dot1x mab authentication port-control auto authentication periodic authentication timer reauthenticate server authentication timer restart 10800 authentication violation replace mab no snmp trap link-status dot1x pae authenticator dot1x timeout quiet-period 2 dot1x timeout tx-period 3 spanning-tree portfast edge spanning-tree bpduguard enable end >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
