I'm trying to do a PXE boot from a workstation that is plugged into a switch that has PacketFence enabled on it. I configured the switch using the installation guide.
Installation Guide (packetfence.org) <https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_configuring_cisco_catalyst_2960_switch> We do have IP helpers configured on the switch that point to our DHCP server. If we can we'd like to disable the PacketFence services on port 43 or allow the DHCP request through. Below are some of the settings on the switch. *aaa authentication port-access eap-radius server-group "packetfence"* *aaa authentication mac-based chap-radius server-group "packetfence"* *.* *aaa port-access mac-based 1-36* *.* *aaa port-access 43 controlled-direction in* I've been digging in the *configuration* tab on the PacketFence server but haven't been able to find anything that helps. Any help is greatly appreciated !
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
