Hello, I am a new PF user and currently overwhelmed with the settings of PF.
Our PacketFence installation has 2 network ports currently. 1 interface is WAN. 123.123.123.160 The other interface is LAN. 10.0.0.1 We have one /24 public address block at our disposal. What I like to do with the PacketFence VM is the following: NAT private 10.10.5.X to public 123.123.123.5 NAT private 10.10.6.X to public 123.123.123.6 NAT private 10.10.7.X to public 123.123.123.7 and so forth. For 120 IP addresses. What do I need to do to accomplish this? I need to set up virtual interfaces in PacketFence for every user. The IP addresses are examples. An internal user should receive 1 public IP address. (example 123.123.123.7) Each device of this user should receive an IP from 10.10.7.X and each device from this user should use the public IP address 123.123.123.7 Lastly, users should be on separate VLANs. 10.10.7.X is VLAN 7. I am unsure how I can accomplish this with PF. I am a newbie in networks. As far as I understand, this is possible. I just need a little help to figure this out. Greetings Ivo Damjanovic SielNet e.V. _______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
