Hello Fabrice, thank you for the answer; for simplicity I started from scratch with a new installation and configured the internal interface as inline l2, following the guide, but I was unable to add "portal" as additional service: when I save, the service disappear from the input field. DHCP on that interface works; I've configured also a connection profile with null authentication and filter "Network" with the network of the internal interface. Ip forwarding is enabled, management network has a default gateway and can connect to any site on internet; client gets ip address from packetfence and appears on the "Nodes" section with the status of "Unregistered", but still the registration page doesn't appear when I try to connect to a http:// site (like http://www.google.com). I've also tried to set 0.0.0.0/0 on connection profile filter, but nothing changes. I also tried to enable "Portal" on the management interface Any hint, direction ? I've read the chapter 10 "Adding inline enforcement to existing installation": is there other configurations on other chapters? Thank you Best Regards Marco
Il giorno gio 22 set 2022 alle ore 04:02 Fabrice Durand <oeufd...@gmail.com> ha scritto: > Hello Marco, > > you can try the inline setup. > One interface is configured as inline l2 and the other one as the > management interface (facing internet) > So when you plug something in the inline network you should be able to see > the portal. (it´s really the first thing you need to achieve) > Btw you will have to add more config in order to do SAML. > > Regards > Fabrice > > > Le mar. 20 sept. 2022 à 14:23, Marco Naimoli via PacketFence-users < > packetfence-users@lists.sourceforge.net> a écrit : > >> Hi, I'm new to PacketFence; I've installed a new instance (ZEN) and would >> like to configure a >> (simple) captive portal with SAML authentication; >> it should be something like >> client --> PacketFence ---> internet >> Is this kind of setup supported ? In the documentation I find only >> examples that involves the configuration of a switch >> I've tried to configure it, but the client is never redirect to the >> Identity Provider (I've configured the passthrough with the Identity >> Provider hostname) >> Is there any example about a Captive portal setup other than the official >> documentation ? >> Thank you >> Marco >> _______________________________________________ >> PacketFence-users mailing list >> PacketFence-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/packetfence-users >> >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
