Hello Yassine,

I backported a fix for that on 12.2 , the new package should be available
tomorrow.

Regards
Fabrice


Le mar. 9 mai 2023 à 08:28, TISSIR, Yassine via PacketFence-users <
packetfence-users@lists.sourceforge.net> a écrit :

> Still stuck on the same problem
> Any suggestion would be really appreciated
>
> Le lun. 3 avr. 2023 à 23:20, TISSIR, Yassine <56...@etu.he2b.be> a écrit :
>
>> Hello everyone ,
>> I'm currently testing packetfence for my company. I started with version
>> 11.2 but I decided to upgrade to 12.2 because of an issue that I think
>> prevented getting the captive portal to work in vlan enforcement mode (A
>> guest computer placed in the registration VLAN was redirected to
>> "packetfence.domain/captive-portal" that points to  66.70.255.147 but the
>> page was loading indefinitely). The problem is that after the update I have
>> the following error when trying to save ACLs for registration VLAN:
>>
>>  "AccessListMapping.0.accesslist: WARNING: Syntax error in
>> ACL:packetfence, near: >in<.
>> "config/switch/192.168.1.10"
>>
>> I also had an AD authentication source for the domain computers that
>> worked fine before the update, but stopped working now (Audit tab shows
>> successfuls authentications, but the computers don't get internet access
>> anymore).
>>
>> Here is my switches.conf :
>>
>> [default]
>> description=aruba sw
>> VlanMap=N
>> ExternalPortalEnforcement=Y
>> deauthOnPrevious=N
>> [192.168.1.10]
>> group=default
>> description=ARUBA 2930
>> wsPwd=xxxxxx
>> wsUser=xxxxxx
>> SNMPPrivProtocolWrite=md5
>> SNMPPrivProtocolRead=md5
>> SNMPAuthProtocolRead=md5
>> SNMPAuthProtocolWrite=md5
>> SNMPUserNameWrite=xxxxxx
>> SNMPVersion=3
>> SNMPUserNameRead=xxxxxx
>> SNMPAuthPasswordWrite=xxxxxx
>> SNMPAuthPasswordRead=xxxxxx
>> SNMPPrivPasswordRead=xxxxxx
>> SNMPPrivPasswordWrite=xxxxxx
>> SNMPEngineID=xxxxxx
>> SNMPPrivProtocolTrap=AES
>> SNMPUserNameTrap=xxxxxx
>> SNMPAuthProtocolTrap=md5
>> SNMPVersionTrap=3
>> SNMPAuthPasswordTrap=xxxxxx
>> SNMPPrivPasswordTrap=xxxxxx
>> guestVlan=10
>> defaultVlan=10
>> registrationVlan=20
>> type=Aruba::2930M
>> radiusSecret=xxxxxx
>> VlanMap=Y
>> coaPort=3799
>> isolationVlan=99
>> UserVlan=10
>> macDetectionVlan=20
>> ExternalPortalEnforcement=N
>> registrationUrl=http://192.168.1.4/Aruba::2930M
>> UrlMap=Y
>> AccessListMap=Y
>>
>>
>> The ACLS that I try to save are the one from the Network Devices
>> Configuration Guide for Aruba 2930 switch:
>>
>> permit in tcp from any to 192.168.1.4 80
>> permit in tcp from any to 192.168.1.4 443
>> deny in tcp from any to any 80 cpy
>> deny in tcp from any to any 443 cpy
>> permit in udp from any to any 53
>> permit in udp from any to any 67
>>
>> Any help would be really appreciated
>>
>>
>>
> _______________________________________________
> PacketFence-users mailing list
> PacketFence-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to