Hello Community,

Looking for some assistance with Aruba IAP group.  Initially I had everything 
working ok.  Due to some issues with the APs themselves I had to update the 
firmware to 8.12.05_92330 SSR
Since then I am receiving Disconnect-NAK from the APs when a COA is issued.

These are Aruba instants mostly model 505 and a couple 515
The 515 is the preferred master.

The template I am using is Aruba Instant Access, also tried the Aruba Instant 
with seemingly no change.
I am doing Role Mapping by VLAN ID
Use COA
Use Connector For Deauth
I also tried forcing the COA port to 5999

All was working prior to firmware update currently the only difference is 
making the port 5999.
Authorizations and VLAN assignment is still functioning.

Here is the RADIUS log with a Disconnect-NAK

RADIUS Reply
NAS-IP-Address = 10.1.145.100 "
Message-Authenticator = DDJJlB(??/0?`?e "
NAS-Port-Type = Wireless-802.11 "
Code = Disconnect-NAK "
Error-Cause = Session-Context-Not-Found

Does anyone have some ideas on how to resolve this?

Jeremy Yoke
IT Manager
TREALITY(r) Simulation Visual Systems
600 Bellbrook Ave.
Xenia, Ohio 45385
Cell: +1 (937) 901 5684
jeremy.y...@trealitysvs.com<mailto:jeremy.y...@trealitysvs.com>
www.TREALITYSVS.com<http://www.trealitysvs.com/>

________________________________
Confidentiality Notice:

This e-mail message, including any attachments, is for the sole use of the 
intended recipient(s) and may contain confidential or proprietary information. 
Any unauthorized review, use, disclosure, or distribution is prohibited. If you 
are not the intended recipient, immediately contact the sender by reply e-mail 
and destroy all copies of the original message.

TREALITY SVS, LLC.<http://www.trealitysvs.com/>
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to