De : [email protected] <[email protected]> Envoyé : jeudi 13 novembre 2025 09:48 À : 'Fabrice Durand' <[email protected]> Objet : RE: [PacketFence-users] Problem integration LDAp Hello, Packetfence15 here's the problem on packetfence.log: 2025-11-13T08:41:49.356309+00:00 fence15 pfldapexplorer-docker-wrapper[2411]: t=2025-11-13T08:41:49+0000 lvl=info msg="Failed to connect to the LDAP server: LDAP Result Code 200 "Network Error": tls: failed to parse certificate from server: x509: negative serial number" pid=7 What's strange is that when you install it, it works for 5 minutes, then this error appears, and then nothing happens. [se4prof] connection_timeout=1 verify=none usernameattribute=cn dead_duration=60 binddn=cn=Administrator,cn=users,dc=XXXXX,dc=eu shuffle=0 read_timeout=10 scope=sub email_attribute=mail basedn=dc=XXXX,dc=eu realms= port=636 encryption=ssl monitor=0 type=AD description=se4prof password=PF_ENC[data:mLzdPU/sy8wuawMk,tag:JVGWZUdviciqOoi3puas7w==,iv:EHkRuQSp+VDw1TlS,ad:] cache_match=0 write_timeout=5 host=172.16.1.3 set_access_durations_action= searchattributes= use_connector=0 De : Fabrice Durand <[email protected] <mailto:[email protected]> > Envoyé : jeudi 6 novembre 2025 20:20 À : [email protected] <mailto:[email protected]> Cc : [email protected] <mailto:[email protected]> Objet : Re: [PacketFence-users] Problem integration LDAp Hello Eric, I think the best thing to do is to capture the ldap traffic with tshark and check to see why it fails. Probably an incorrect request but once you have it, let me know we will probably need to do a patch for that. Regards Fabrice Le jeu. 6 nov. 2025 à 07:46, eroger2--- via PacketFence-users <[email protected] <mailto:[email protected]> > a écrit : Hello, I'm testing versions 14 and 15, but I'm having the same issue in the "Authentication Sources" menu. I'm trying to add an LDAP server attached to the latest Samba4 update. It worked in Packetfence version 13.0, but when "Add Condition" was split into two modules, "Add Packetfence Condition" and "Add LDAP Condition," the problem is that in the LDAP condition, it always returns "LDAP server not found." I've correctly entered the previous values, including the ADsamba server IP address, and when I run a connection test, it returns "Successful." However, when I try to select the CN (presumably referring to a specific server), nothing appears, and it just loops. Could you tell me the reason or shed some light on this, as I've seen on some websites that there's been a problem since the split, as mentioned above? Thank you very much. Sincerely, Eric _______________________________________________ PacketFence-users mailing list [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
