I solved my issues. To get the Calling Station Id and SSID to show up in
the RADIUS Audit logs, I added the following in the post-auth section in
the packetfence-tunnel config after finding this old post from
https://freeradius-users.freeradius.narkive.com/tQmPSKkg/vendor-attributes-not-copied-to-inner-tunnel
if (&outer.request:Called-Station-SSID) {
update request {
&Called-Station-SSID := &outer.request:Called-Station-SSID
}
}
if (&outer.request:Calling-Station-Id) {
update request {
&Calling-Station-Id := &outer.request:Calling-Station-Id
}
}
I hope I am replying to this mailing list correctly.
On Fri, Nov 7, 2025 at 9:29 PM Frank B. <[email protected]> wrote:
> I have been trying to get some missing RADIUS Audit Logs info like the
> Calling Station ID and SSID show up in packetfence for PEAP with TLS
> inner-tunnel but no success. PEAP-TLS auth is working but just missing
> those two info in that page.
>
> NAS IP Address and Server IP fields were also missing before but I fixed
> those by adding "packetfence-nas-ip-address" and update {
> &request:PacketFence-Radius-Ip := "%{Packet-Dst-IP-Address}" in the
> packetfence-tunnel config.
>
> Does anyone know what settings or variables to add to the
> packetfence-tunnel to get Calling Station ID and SSID info? I just need
> those info so the output is the same for both PEAP-TLS and EAP-TLS
> authentication.
>
> I am running Packetfence v15 installed from ISO. Thank you.
>
>
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
