At 6:22 AM -0800 4/2/99, Andrew Ball wrote: >I just received confirmation from Metrowerks that the -c -1 and -2 flags >for bitmap names don't work. > >Here, courtesy of Jun-Kiat Lam of MW, are the *correct* flag values: > >No flags means 1-bit with compression. >-c means turn "off" compression (contrary to the docs). >-1 means turn "off" 1 bit per pixel (contrary to the docs). >-2 means turn "on" 2 bits per pixel (docs are correct). Almost. -1 will _include_ the 1 bit image, which is otherwise excluded if the -2 flag is set. ...at least, that's what the MPW PilotRez tool does, and the MW tool is built from the same sources. You don't need to include -1 unless you also include -2. When you say "the docs" what are you talking about? The only docs I know about are in the article at http://palm.3com.com/devzone/docs/seeinggray.html, which matches your description except for the -1 flag. Are these described elsewhere? --Bob
