Your best bet is to look in the palm developer zone (www.palm.com) and sign
up as a hardware developer.
Palm will then send you a massive amount of information, including names,
addresses, part numbers for connectors for the palm pilot.
It is all free, you just need to send then a signed form - which is
downloadable from the above site.
Dave Griffiths
> -----Original Message-----
> From: Chuck Freeman [mailto:[EMAIL PROTECTED]]
> Sent: 08 March 1999 17:11
> To: [EMAIL PROTECTED]
> Subject: Palm to DataSouth Printer Interface Cable
>
>
> I am developing a cable to connect between a Palm-Pilot and a
> DataSouth printer. This will be a custom cable is to be
> manufactured at our facility and then packaged with DataSouth
> printers to be used with the Palm line. Due to the high cost
> involved, buying a Palm Hot Link cable and modifying it to my
> needs is not an option. I am having difficulty locating the
> manufacturer and part number of the 10 pin connector that the
> connects to the Palm-Pilot. If anyone knows this number, I would
> appreciate your passing this information along.
>
> Thanks in Advance
> Regards
> Chuck Freeman
> DataSouth Computer Corporation
>
