Hi, I am trying make a loop that sends serial data every second when there is no input into the Palm. But I have a problem with I think are system events. I have tested the application and changed it many times. It works okay, but sometimes the pulses are send on a different time. Maybe four or 8ms later. This always happens at the precise same time. I have done an envelope on the scope. So I think that the Palm comes in a system event and handles it while it should sending data. Now I would like to know if it's possible to force these system events do to their handling only the first 100ms of every second. This way they won't interfere with the sending and timing. Before anyone says it isn't possible to do ms timing. I know that Systicks on my PalmIIIx does only give ticks every 10ms bit with the accuracy of 10,000ms. So you can send pulses on that exact time. That's also why i am confused that the application sends the signal sometimes a few ms earlier or later. Already thanks for the support, Patrick Heynen Trainee at Medtronic +31433566709 [EMAIL PROTECTED] -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palm.com/devzone/mailinglists.html
