Constructor however has a problem with bitmap families in that it
ignores the specified size and displays the bitmap form object as if
it were only 16x16. Place it where the upper left corner should be
and it will appear properly in the generated program. Consider
temporarily telling the form object to display the 1bpp bitmap so you
can place it properly. Then, before you save, switch it back to the
id of the bitmap family.
HTH,
-- Paul
___________________________________________________________
Paul Dugas Dugas Enterprises, LLC
phone - 404.932.1355 1711 Indian Ridge Drive
fax - 770.516.4841 Woodstock, GA 30189-6856
email - [EMAIL PROTECTED] http://pauld.dugas.com/
pager - [EMAIL PROTECTED] "All generalizations are false."
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Dave
> Lippincott
> Sent: Friday, May 19, 2000 9:27 AM
> To: Palm Developer Forum
> Subject: Re: changing size of bitmaps?
>
>
> Open the bitmap and select the 'options' menu then 'Set
> Image Size...'
> If you're using a bitmap family, the size of the individual
> bitmaps (set
> using the above method) must match the size set in the
> 'Bitmap Family
> Properties' dialog. Open the bitmap family, change the
> size to what you
> need, than edit each bitmap in the family (without closing
> the family
> dialog) to match the size set in the family dialog.
>
>
> -----Original Message-----
> From: John Corelli <[EMAIL PROTECTED]>
> To: Palm Developer Forum <[EMAIL PROTECTED]>
> Date: Friday, May 19, 2000 8:46 AM
> Subject: changing size of bitmaps?
>
>
> >In Constructor, I try to create my own bitmap. I've been
> going through
> >the MemoPad tutorial and I was able to use/implement the
> info bitmap
> >that was already done (43x54). But I can't seem to create
> a new one
> >that doesn't default to 16x16. I go and change the
> height/width properties
> >but the bitmap editor still comes up in 16x16 and when I
> try to save it,
> >I get an error about the size of the bitmap not matching
> the properties
> >box. What am I doing wrong?
> >
> >John
> >
> >--
> >For information on using the Palm Developer Forums, or to
> unsubscribe,
> please see http://www.palmos.com/dev/tech/support/forums/
> >
> >
>
>
> --
> For information on using the Palm Developer Forums, or to
> unsubscribe, please see
> http://www.palmos.com/dev/tech/support/forums/
>
>
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
