Can't hptsync
--------------
> "Unable to initiate HotSync because the serial port is in use by another
> application".
there may 2 reasons
1. Check the port in the setup panel whether its properly assigned. check
any other program isusing that port. its better exit the hosync and run
again.
2. If IiEnhance was there in ur palm, go to preferences and tap te tap
Serial/Ir in the dropdown list. check whether Serial button was enabled or
nat. it should be serial if u r doing serial hotsync. other wise tap IR
button if ur doing an IR hotsync
with regards
Prasad
----- Original Message -----
From: John J. Corelli <[EMAIL PROTECTED]>
To: Palm Developer Forum <[EMAIL PROTECTED]>
Sent: Wednesday, May 31, 2000 3:52 AM
Subject: Can't hot sync
> Okay, so I admit I probably hosed this up with my efforts to get the
serial
> port debugging capabilities
> working....I did a soft reset on my Visor because I couldn't get into the
> console mode of the debugger
> (the shortcut..2 problem I've been having). I got in some mode that
> required me to do a HW reset and
> now I want to sync back with my desktop.
>
> When I hook up my cradle and hit the hot sync button, my handheld gives me
> the message:
> "Unable to initiate HotSync because the serial port is in use by another
> application".
>
> I'm headed into the documentation, but if there's any input out there, I'd
> appreciate it.
>
> John
>
>
> --
> For information on using the Palm Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/tech/support/forums/
>
>
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
