Christian Traber wrote:
> Hello,
>
> seems like we have same problem.
> You can see it in comm-dev-forum (receiving from serial port)
>
> I already tried with SrmReceiveWindowOpen, (see the answer of Neil Rhodes)
> but it doesn't
> work in my case.
>
> Maybe it works for you.
Same thing as what you describe in the reply to Neil Rhodes. The SrmReceiveWindowOpen
call works but then there is no data
available!!! Have you found any more help?
>
>
> Christian Traber
>
> "Craig Allan Jeffree" <[EMAIL PROTECTED]> schrieb im Newsbeitrag
> news:15626@palm-dev-forum...
> >
> > Hello all,
> > I'm writing some code for a Palm Vx running OS v3.5 which is
> > communicating over the serial port. I am having troubles with the
> > incoming data notification. I am initialising a wakeup handler with
> > SrmSetWakeupHandler and then using SrmPrimeWakeupHandler to prime the
> > wakeup handler for 1 byte of data. This should mean that the wakeup
> > handler function gets called whenever there is 1 or more bytes of data
> > available on the serial port. In the wakeup handler I use SrmReceive to
> > try and get data, also SrmReceiveCheck can be used to see how many bytes
> > are available. The problem is that the check reports 0 bytes available
> > and if I try to get the data anyway it returns a timeout error. But I
> > know that there is data on the port - The modem I am communicating with
> > definately has sent data to the palm.
> >
> > I don't understand why I get this notification that data is
> > ready but then get told that no data is ready on the port!!!!!!!!!
> >
> >
> > Thanks in advance
> >
> > Craig Jeffree
> >
> >
> >
>
> --
> For information on using the Palm Developer Forums, or to unsubscribe, please see
>http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
