If you are using the original straight-from-the-CD R5 then the command-line
switches won't work. They will only work with IDE 3.2 and above, and R5
comes with IDE 3.1. However, downloading and installing the CW for Palm R5
Patch 1 and Patch 2 will give you the newer IDE which will support this.
Available at www.metrowerks.com/download, search by product for CW for Palm
Computing platform 5.
Rgds,
Jun-Kiat Lam
Metrowerks Technical Support
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Butch
Howard
Sent: Tuesday, July 11, 2000 4:21 PM
To: Palm Developer Forum
Subject: Re: CW command line?
Thanks for the doc!
I have tried these switches with CW(R5). It opens the project, but does not
build it. Any suggesitons what I might be doing wrong?
Command lines I have tried:
..\CodeWarrior\Bin>ide.exe /t foo /r /b /c /q /s "e:\dev\foo\foo.mcp"
..\CodeWarrior\Bin>ide.exe /r /b /c /q /s "e:\dev\foo\foo.mcp"
..\CodeWarrior\Bin>ide.exe /t"foo (.prc for device)" /r /b /c /q /s
"e:\dev\foo\foo.mcp"
-----Original Message-----
From: Ben Combee <[EMAIL PROTECTED]>
Newsgroups: palm-dev-forum
To: Palm Developer Forum <[EMAIL PROTECTED]>
Date: Tuesday, July 11, 2000 11:10 AM
Subject: Re: CW command line?
This was documented in the CW Pro 4 release notes, but it never got into the
IDE manual. These all work in the Pro 5 IDE that is also used in the Palm 6
product, as best I can tell.
--
For information on using the Palm Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
