I have posted this question in the nearby comm-dev forum, but nobody replied. I am testing my luck here. Reply of any sort is greatly appreciated!! ------------------------------------------------------- Hi, I've been reading this forum for a while, and I can't find any posts with the problem I am experiencing. I am having problems setting up a connection between Palm Simulator (version 5.2 or 5.0) and the Virtual Phone. The error message I am getting when I try to test the connection in the PalmOS Preferences is "Connection is OK, but phone does not match settings. For best results use the driver for your phone." I've tried to change the Virtual Phone settings under Tools->Service Configuration, but nothing seems to work. The log I am getting in Virtual Phone is:
--== SET VP POWER: ON ==-- ATE0V1+CMEE=1;+CSCS="GSM";+CMGF=0 OK AT+CGMI Virtual Phone OK AT+CGMM 1 OK ATE0V1+CMEE=1;+CSCS="GSM";+CMGF=0 OK Also, if I try to send a sms message from the simulator (SMS version 4.5) to the Virtual Phone, I get an error message in the Simulator: "The phone was unable to handle your request. Please make sure you are using the right driver for your phone". And the error message on the Virtual Phone is: AT+CMGS=20 +CME ERROR: 3 001100098133566598F60000A70767B2F94C369F01 +CME ERROR: 4 +CME ERROR: 4 +CME ERROR: 4 +CME ERROR: 4 +CME ERROR: 4 +CME ERROR: 4 +CME ERROR: 4 +CME ERROR: 4 Can any of you suggest possible solutions? Any suggestions will be greatly appreciated! -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
