hardly, if you include human time to replace digitizer :) Also if the new digitizer has a different resistance it will nto at ALL work without powerdigi
---- Best Regards, Dmitry Grinberg (847) 226 9295 2009/5/17 Philip Sheard <shea...@tiscali.co.uk>: > Or you could import replacement digitizers from China, and fit them instead. > That is much cheaper than PowerDigi, even for a 480 x 320 display. > > -----Original Message----- > From: Dmitry Grinberg [mailto:dmitr...@gmail.com] > Sent: 17 May 2009 18:56 > To: Palm Developer Forum > Subject: Re: Classic emulator interface on Palm Pre > > Or you could install PowerDiGi on them, which will make them align > 100% of the time, and is both much cheaper than Janam and cheaper than > a new device... > ---- > Best Regards, > Dmitry Grinberg > (847) 226 9295 > > > > On Sat, May 16, 2009 at 10:29 AM, Baxter <bax...@baxcode.com> wrote: >> Aceeca sells the Meazura Palm starting at $399 USD - and it won't break >> >> -- >> >> "Lee Church" <lchu...@mobitechsystems.com> wrote in message >> news:187...@palm-dev-forum... >>> Most of my customers started with E2's to get a low entry price. But the >>> customers we support that have delivery drivers or route salesmen have >>> found >>> them to be a false economy. Many of these customer found they were >>> replacing units every 6-9 months. I visited with one customer last > month, >>> and out of 6 units only one would align the digitizer properly, all due > to >>> rough handling. Right now his guys are putting up with it, since he >>> cannot >>> buy any new units. But Janam units are in his budget for this summer. > In >>> warehouses or restaurant usage I could not image the usage pattern would >>> be >>> much different. This is the same discussion I saw back when a Zire was >>> available for under $100; it's just penny-wise and pound-foolish in my >>> experience. >>> >> <snip> >> >> >> >> -- >> For information on using the ACCESS Developer Forums, or to unsubscribe, > please see http://www.access-company.com/developers/forums/ >> > > -- > For information on using the ACCESS Developer Forums, or to unsubscribe, > please see http://www.access-company.com/developers/forums/ > > > -- > For information on using the ACCESS Developer Forums, or to unsubscribe, > please see http://www.access-company.com/developers/forums/ > -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/