You can buy a replacement digitizer on eBay for US$10 - see item #220394300832. They are quite easy to fit. It only takes about 5 minutes, and all you need is a T5 screwdriver. The QA is good too. Only about 5% of the LCDs and digitizers that I import are faulty. They replace mine straight away, but then I am regular customer.
While you are about it, you could replace the one your T3 as well. It is the same digitizer. Indeed it is the same LCD - only the ribbon cable to the motherboard is different. Tackling a slider is more difficult, but you will find excellent instructions at http://www.pdaparts.com/. -----Original Message----- From: Luc Le Blanc [mailto:[email protected]] Sent: 20 May 2009 23:10 To: Palm Developer Forum Subject: TX Status Bar confused with Graffiti area 2 days ago I bought a barely used TX, both to replace my T3 and its scratched screen and to test a seemingly TX-related Bluetooth problem a user has with my freeware. Today, the Status Bar suddenly stopped working, instead, taps on it appear in the Graffiti area. Accordingly, when I tap in the Graffiti area, the tap appears about 5mm higher, yet taps above this are work OK. A hard reset din't help. Is there a cure for that? Luc Le Blanc -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/ -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
