Thanx Steve...
That's exactly what I wanted to hear...
Steve Sabram wrote:
> Unfortunately, there isn't a reliable way to handle this in software on the current
>PalmOS. There are several well documented by
> third party tricks to do this but I highly advice against it if this is production
>code.
>
> My timing rule of thumb has been if you want to do anything with a precision below
>10ms, you need to break out the soldering iron.
> I have seen devices like a custom microcontroller configuration or a custom
>Springboard module developed to handle just this
> situation. You may want to consider getting a hold of the modem plastic cases and
>developing a microcontroller board that can read
> the modem button at a very reliable rate for this.
>
> Steve
>
> Patrick Ouellet wrote:
>
> > Ok Still on my Serial comm problem
> >
> > Ok tell me if im wrong but...
> > On palm device delay are calculated in ticks per second...
> > And again tell me if Im wrong,
> > but 1 ticks is around 6ms for my palm 3e
> >
> > Now is it possible to make a delay of 0.33 ticks
> > or 2ms
> >
> > Thanx
> >
> > --
> > For information on using the Palm Developer Forums, or to unsubscribe, please see
>http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
