Actually, it seems to me that he would need to "uncross" the Tx and Rx
lines. The hotsync cradle's TX pin goes to the PC com port's RX pin, and
vice versa. Since he's tested the app with the emulator and a direct serial
cable, the device is expecting TX on the PC's TX line, and RX on the PC's RX
line, so the fact that the hotsync cradle cable is not direct is probably
the problem, and needs to be compensated by crossing TX and RX again.
-Thomee Wright-
"Dave Lippincott" <[EMAIL PROTECTED]> wrote in message
news:20292@palm-dev-forum...
>
> One thought... the cradle already crosses the Tx and Rx lines. I'd make
> sure you're not crossing them a second time when you use your Palm. But
> there are really few differences between Poser and a device.
>
> I have found that if your serial app works with Poser, it almost always
> works on a device (but not always visa versa)
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
