FWIW, I have only seen this when I forget to close the library. Are you
running 3.1 or 3.5 on the actual VII?
-jjf
-----Original Message-----
From: Michael J. Maigret [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 02, 2000 7:44 PM
To: Palm Developer Forum
Subject: Problems with INet on Palm VII (inetErrTooManyClients)
I am currently having problems with the INet library on the Palm VII
device.
Basically, I am performing several wireless data transactions, closing the
socket and the INet library and re-opening both between transactions.
However, after a while my application just exits (not very gracefully
either).
If I re-enter my application and try to resume transactions it usually
works for a short while (much shorter than the first attempt) and then
exits again.
And again.
Usually, after about 3 'exits', I get an inetErrTooManyClients error when
attmepting to open the library.
Strange, seeing it works perfectly on POSE.
Could somebody tell me exactly what the inetErrTooManyClients error means
and why it might be happening in this situation?
Thanks for any help.
Mike Maigret
--
For information on using the Palm Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
