Here is a trick I _always_ use to be sure the Palm device is in Debug mode:
Tap on the Find icon.
Enter the shortcut . . 2 sequence as the find text.
IF you enter the Debug sequence correctly
then as soon as the 2 is entered the entire string is erased.
Start the Debug session (I always download a .PRC at this point).
While the PRC is downloading I tap on the Cancel button of the Find form.
The PRC download finishes in a while and I am ready to start debugging.
HTH,
Randy Maxwell
-----Original Message-----
From: NovElectMkt [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 02, 2001 10:04 AM
To: Palm Developer Forum
Subject: Emulator over the USB for Handspring
Have CW 6.0, a Handspring Prism. After defining in CW that I will be using
the device to debug, running the debugger asks me to put the device in debug
mode. I turn the Prism on while on the cradle, go to the main menu and type
the debug sequence: the shortcut symbol, two taps and the number 2.
It doesn't do anything. CW waits and the Prism beeps once or twice and
stares at me. What am I doing wrong?
--
For information on using the Palm Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
