>Subject: Is it POSE-able to RAS
>From: "John Stephenson" <[EMAIL PROTECTED]>
>Is it possible to use the POSE to do networking testing by RAS-ing into the
>same box it is running on?
Yes
>I have tried by setting the "Serial Port = TCP" but it never connects. With
>the "Redirect Netlib..." checked the "Connect/Disconect" button toggles but
>my machine does not show anyone connected.
For RAS you will need 2 (two) seriel adapters which you
"short wire" (sorry for my english) with a Null modem cable. Set up e.g on
Serial 1 the NullModem Device on NT/Unix/... and switch Pose to connect to
serial port 2.
To establish a network sync you do not need RAS, just set "Serial Port = TCP"
and dial 00.
Kind Regards
Juergen Schwister / Cologne
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
