hello,
Try to give them in hexa decimal and try it out.
srini
--- Miron Ophir <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I have a large application (11 segment, ~300K) which
> perform some graphics
> operations. When I try to change the Visor screen
> depth to 16 bits, the
> operation is performed with no error, but the actual
> screen depth remain 8
> bit:
>
> UInt32 gOldDepth, depth = 16;
> UInt32 gOldWidth, gOldHeight;
>
> Boolean enableColor;
>
> WinScreenMode(winScreenModeGet, &gOldWidth,
> &gOldHeight, &gOldDepth,
> &enableColor);
>
> WinScreenMode(winScreenModeSet, &gOldWidth,
> &gOldHeight, &depth,
> &enableColor);
>
> WinScreenMode(winScreenModeGet, &gOldWidth,
> &gOldHeight, &depth,
> &enableColor);
>
> After the last "Get" the depth is 8, alltough it was
> set a line before to
> 16.
>
>
> On a small Starter application everything is ok.
> Any ideas?
>
> --
> --
> Regards,
> Miron.
>
>
======================================================================
> Eng. Miron Ophir,
> The MobiMate Team
> E-Mail: [EMAIL PROTECTED]
> Home Page: www.mobimate.com
> Private E-Mail: [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> Private Home Page: http://members.tripod.com/ophirm
> ICQ: 6785948
>
======================================================================
>
>
>
>
> --
> For information on using the Palm Developer Forums,
> or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
__________________________________________________
Do You Yahoo!?
Spot the hottest trends in music, movies, and more.
http://buzz.yahoo.com/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
