--On 27 July 2001 11:22 +0400 Madina <[EMAIL PROTECTED]> wrote:
> Then it says to connect a null modem cable from COM1 port to the
> COM2 port. How???? And would it make a difference if i used COM 4 instead
> for POSE? Thanks
> Madina.
Null modem is just a twisted modem cable, i. e. TX goes to RX and RX goes
to TX. So, connect a null modem cable from port A to port B and that's it.
:-)
IM
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
