Hi Eric,
I have experienced this problem, too. In my case, I build a serial terminal to
'listen' an especific hardware. I confirmed this
problem using the software PortMon and I verified that when the POSE uses the serial
port to communicate with the hardware it
'cancels' the communication and nothing more is sent or received even with other
terminal like the HyperTerminal of Windows. When I
install my application on a real device (m100) the communication is perfect even if I
use baud rate at 115200 kbs.
I am using m100 with PalmOS (updated) 3.5.3.
Vital Cruvinel Ferreira
S&V Consultoria / ByteCode
S�o Paulo - Brazil
"Eric W. Sirko" wrote:
> Are there any known problems with using POSE (for Windows) to debug
> applications that use the serial port? With my application, under certain
> semi-reproducable circumstances, the serial port ceases to work, i.e. when I
> call SrmSend, it returns no error but no characters are actually sent out.
> Even more puzzling is that the serial port remains "broken" even if I reset
> POSE; I must exit POSE and restart it for my application to work again. Has
> anyone else ever experienced such a problem? The problem seems to occur
> more frequently when the application uses higher baud rates.
>
> I am using POSE 3.2 and CodeWarrior 7.
>
> Regards,
>
> Eric W. Sirko
> Softworks Solutions, LLC
>
> --
> For information on using the Palm Developer Forums, or to unsubscribe, please see
>http://www.palmos.com/dev/tech/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
