I want to develop an application that will use many screens. I will be developing this application for the Palm M105. I want to use the silkscreen/graffiti area as a virtual grid that when the user touches a certain area of the silkscreen it fires an event that I can program. I have several uses for this such as, causing a specific screen to be activated dependent upon the grid cell location of the silkscreen area that is touched. I want the user to be able to jump to any screen by one touch within the silkscreen/graffiti area. I posted a similar message such as this on another Palm forum to see if this was possible and the replies indicated that it is possible and that several commercial software programs use the silkscreen/graffiti area as a keypad. Maybe someone in this forum, knows where to find documentation or examples concerning programming the sillkscreen/graffiti area and key event type processes that would be necessary to make this work. -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/
