I'm using this one. https://store.palm.com/Catalog/productdetails.asp?productnr=P10804U&parent=2 035&type=1
Sorry I don't have a larger picture. Basically, it barely snaps in, and has no release mechanism since it's so easy to pull out. It has to small hooked metal pieces that try to grab onto the m505. Does the cable you use (and pointed me to below) have a push button to release the cable from the m505? I see it has a thumb button of some type from the enlarged picture, but I can't tell if it is pushable or not. Thanks for your help. -Keith -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Adrian Nicolaiev Sent: Wednesday, January 23, 2002 4:34 PM To: Palm Developer Forum Subject: Re: m505 serial cable Which one are you using? I am using this one without problems: http://shop.brando.com.hk/image/m500serialhotsync.jpg http://shop.brando.com.hk/m500serialhotsync.php HTH, Adrian > Does anyone know where I can find a solution to holding the m505 serial > hotsync cable tightly to the m505? The serial hotsync cable can barely > stay connected to the m505 at all. My application connects to wireless > measurement receivers via serial cable, but it the cable keeps falling out > of the m505. -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/
