I have had no problem migrating my product line from Palm IIIc (OS 3.5) to the m505 (OS 4.0). All serial communications that I had written for the IIIc just worked like a champ the 1st time on the m505. No rewritting of code necessary. I would recommend you get the OS4 rom for your testing and development though. And as always, test is on an actual device before you ship anything.
-Keith Bray -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Eli Mandel Sent: Wednesday, February 06, 2002 11:29 AM To: Palm Developer Forum Subject: Palm m505 and Serial Communications I just finished writing an application for the PalmVx using the New Serial Manager for bi-directional serial communications. I was just told to port it to the Palm m505, which I understand is PalmOS 4.0 - "yesterday". (Never a dull moment...) So, before I dive in, Does the m505 support the standard RS-232 serial communication ? Should I have any problem going from Palm OS 3.5 to PalmOS 4.0 ? Do I need to update my CodeWarrior (V7.1) and/or emulator to support V4.0 ? Any other feasability issues anyone can tell me about ? Thanks All ! -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/tech/support/forums/
