man... didn't see that! -----Original Message----- From: Matt Hebley [mailto:[EMAIL PROTECTED]] Sent: Thursday, May 23, 2002 10:52 AM To: Palm Developer Forum Subject: Re: Bluetooth Library
Or even that you want to use #include not #define... Matt ----- Original Message ----- From: "Kevin OKeefe" <[EMAIL PROTECTED]> To: "Palm Developer Forum" <[EMAIL PROTECTED]> Sent: Thursday, May 23, 2002 12:36 PM Subject: RE: Bluetooth Library Sounds like those files are in a directory that is not in your search path. You need to put them in a directory that is searched or add their directory to the search path. Go to Edit/[project name] Settings... Then on the Access Paths panel, Add your new path. Since you used "<>", you should add that path to the system paths.... Should find them after that. Kevin -----Original Message----- From: Vincent Wong [mailto:[EMAIL PROTECTED]] Sent: Thursday, May 23, 2002 8:46 AM To: Palm Developer Forum Subject: Re: Bluetooth Library I am working on using the Bluetooth Exchange library. I defined both the following ; #define <BtLib.h> #define <BtExgLib.h> However, CW states that it cannot open the files ! I have included the files in the project workspace. Did I miss something else ? Pls help. Rgds, Vincent Wong ----- Original Message ----- From: Alexandre Kazantsev <[EMAIL PROTECTED]> To: Palm Developer Forum <[EMAIL PROTECTED]> Sent: Thursday, May 23, 2002 11:06 PM Subject: Re: Multitasking issue > Chris, > I have to clarify the issue. I do NOT want concurrency. Instead single > tasking during data acquisition is a must because the Palm computer hardly > sustain that acquisition rate. The acquired data is to be transferred across > network when the acquisition stops. Then sometimes after the data transfer > completed, a new data acquisition starts again. The question is if there is > an active background network task, may be in idle state or whatever, > interrupting the data acquisition. > > > ----- Original Message ----- > From: "Chris DiPierro" <[EMAIL PROTECTED]> > Newsgroups: palm-dev-forum > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > Sent: Thursday, May 23, 2002 6:21 PM > Subject: Re: Multitasking issue > > > > I'm not sure I understand your question 100%, but I'll take a stab at it. > > > > Yes, the kernel underlying PalmOS is multitasking, but you don't have > access > > to threads or other processes, so you can't go that route. > > > > However, using the new serial manager, you can specify a callback function > > that will be called everytime the serial port has data available. This > means > > that even if you're in your networking code, you can grab the incoming > data > > in close to realtime. Your networking code would of course have to be > smart > > enough to realize that more data is available (I can't really understand > > what you're doing with the networking code, but it sounded to me like > you're > > trying to send the realtime data stream over the network simultaneously). > > This should give you what you need I think. > > > > > > > My application does real time data acquisition via serial port at 8 > > > Kbytes/sec. Everything is OK so far in spite of the peripheral device > has > > no > > > FIFO. I know that Palm OS is multitasking capable, but usually an > > > application task is running alone. Now I'm going to introduce FTP > > networking > > > functionality in my application. The network stack must be the second > task > > > running concurrently with the application task. There should not be a > > > problem at all if the network activity starts past data acquisition - no > > > interruption of data acquisition occurs. If it stops before the new data > > > acquisition loop starts then OK. However my concern is that as soon as > the > > > network stack has been activated from my application then the network > task > > > would run concurrently forever with the active application even all data > > > transfer completed. In that case the following data acquisition would be > > > interrupted by the concurrent task, which I don't want. > > > > > > Any ideas? > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/support/forums/ > > > > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ ------------------------------------------ The information in this transmittal and any attachments is privileged and confidential and is intended only for the recipient(s) listed above. You are hereby notified that any unauthorized distribution or copying of this transmittal or its attachments is prohibited. If you have received this transmittal in error, please notify Invivodata immediately at (831) 438-9550. ------------------------------------------ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ ------------------------------------------ The information in this transmittal and any attachments is privileged and confidential and is intended only for the recipient(s) listed above. You are hereby notified that any unauthorized distribution or copying of this transmittal or its attachments is prohibited. If you have received this transmittal in error, please notify Invivodata immediately at (831) 438-9550. ------------------------------------------ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
