Hi, Do you try to send at 90600bauds or 9600bauds?? There is no pb for sending/receiving at 9600bps, you have to give 9600 as argument in SrmOpen. You should ensure that your hardware is set up to for communicating at 9600bps. If you use an encoder/decoder after your transceiver you must program it to work at 9600bps. Don't hesitate to ask for other question.
Mates "Paturi, Ramesh P (IndSys)" <[EMAIL PROTECTED]> a �crit dans le message de news: [EMAIL PROTECTED] > > Hi: > We are trying to communicate thru IR to MCP2150 chip usinf raw IR > Comm. We have tried with 57200 bps and we are able to connect till IrLMP. > And we were able to send data. But when we tried to connect with 90600 bps > we are unable to go till IrLMP. Before IrLMP IAS was giving problems. The > only thing diff was the baud rate. Can any one tell if i need to do some > thing more for 9600 bps. I would appreacite if someone can help me by > sending some code recipe. > > > Thanks in advance > Ramesh > > > ____________________________ > Ramesh Paturi > > GE India Design Centre > Edison Towers, > S P Road, Secunderabad-500003 > e-mail: [EMAIL PROTECTED] > Tel : 0091-40- 788 1846 > > > > "THIS E-MAIL MESSAGE ALONG WITH ANY ATTACHMENTS IS INTENDED ONLY FOR THE > ADDRESSEE and may contain confidential and privileged information. > If the reader of this message is not the intended recipient, > you are notified that any dissemination, distribution or copy of this > communication is strictly Prohibited. > If you have received this message by error, please notify us > immediately, return the original mail to the sender and delete the > message from your system." > > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
