By "first three" I meant the first three that I mentioned: CTS RTS and DSR.
Thanks Jeremy At 8/12/2002 06:15 AM, you wrote: >Well the first pin is ground, so there is a 0% chance of controlling it. >The next two belong to the USB port. What use is there to controlling these >two pins that you can't do with the 232 control lines? > >----- Original Message ----- >From: "Jeremy Dewey" <[EMAIL PROTECTED]> >To: "Palm Developer Forum" <[EMAIL PROTECTED]> >Sent: Sunday, August 11, 2002 9:47 PM >Subject: Serial line manipulation > > > > Using SrmGetStatus it is possible to retrieve the status of the CTS RTS >and > > DSR lines. Using SrmControl it is possible to set and get the status of >the > > DTR line. However, there does not seem to be a way to directly set the > > status of the first three pins. Does anyone know how to do this using the > > Serial Manager without writing a virtual driver? > > > > Thanks > > Jeremy > > > > > > > > -- > > For information on using the Palm Developer Forums, or to unsubscribe, >please see http://www.palmos.com/dev/support/forums/ > > > > > > >-- >For information on using the Palm Developer Forums, or to unsubscribe, >please see http://www.palmos.com/dev/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
