I have never tried it with Tungsten, but it certainly works with PalmSim and OS 5, so
I expect it to work with a real device.
Fields don't often display shortcut codes (behavior varies with OS), so "The shortcut
char and two dots in the find box disappear before I can put in the 2" doesn't mean
that they haven't been inputted correctly. Note that by two dots here we mean
precisely two taps (not four, which you would need in normal Grafitti to produce two
periods in a regular field).
If you correctly enter Shortcut..1, you should see a blinking square in the upper left
corner of the display. Shortcut..1 is for hooking a low-level debugger to an active
process and is not generally used or needed for normal application debugging.
>From Codewarrior I strongly recommend that you use Shortcut..2. The normal process
>is to (the first two can be done in either order):
(1) enter Shortcut..2 on the device,
(2) disable Hotsync on the desktop, then lastly
(3) launch your debug session from Codewarrior.
General things to watch out for are:
1. you have Codewarrior configured properly (the debug settings are under the edit
menu!!!) to:
a. talk with your device (not an emulator or simulator).
b. use the correct COMM port.
c. use a reasonable baud rate.
2. you have a functioning serial connection to the device (debugging over usb is
problematic and I, personally, have never done it -- though you can search the forum
archives for the many many posts concerning it).
Hope this helps,
robert mckenzie, palmsource pdx.
-----Original Message-----
From: Martan [mailto:martan@;cstone.net]
Sent: Saturday, November 02, 2002 11:16 AM
To: Palm Developer Forum
Subject: Re: Enter 'ShortCut'..1 on the device to stop execution.
Just to add- what is spec'd in the manual (and here) doesn't work.
I have a tungsten device, does that matter ?
The shortcut char and two dots in the find box disappear
before I can put in the 2
Martan wrote:
>
> I'm afraid I don't understand this.
>
> I'm looking for how to put the device into 'console mode'
> when I'm trying to debug an application on the device
> from code warrior.
>
> Please place the device in console mode by entering
> 'Shortcut'..2
>
> It's pretty cryptic to me.
>
> Robert McKenzie wrote:
> >
> > These are 4 grafitti characters.
> > 1. the shortcut character is a script lower case "l", drawn like a grafitti k on
>its side.
> > 2. a dot
> > 3. a dot
> > 4. the digit "1"
> >
> > It is easiest to pop open the find dialog so that you can get visual feedback as
>you input them.
> >
> > -----Original Message-----
> > From: Martan [mailto:martan@;cstone.net]
> > Sent: Saturday, November 02, 2002 6:24 AM
> > To: Palm Developer Forum
> > Subject: Re: Enter 'ShortCut'..1 on the device to stop execution.
> >
> > I know. how do i do it ?
> >
> > Philip Sheard wrote:
> > >
> > > > Forgive my ignorance, what does this mean ?
> > >
> > > it is for low level debugging
> > >
> > > --
> > > For information on using the Palm Developer Forums, or to unsubscribe, please
>see http://www.palmos.com/dev/support/forums/
> >
> > --
> > For information on using the Palm Developer Forums, or to unsubscribe, please see
>http://www.palmos.com/dev/support/forums/
> >
> > --
> > For information on using the Palm Developer Forums, or to unsubscribe, please see
>http://www.palmos.com/dev/support/forums/
>
> --
> For information on using the Palm Developer Forums, or to unsubscribe, please see
>http://www.palmos.com/dev/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
