OK, I have a PalmIII and when I tap Menu >> Info, I find out that I have 1942K of 1952K Free Memory. When I perform the Hotsync on the app in question, it still gives me that fatal error and resets itself and freezes on the title screen of the Palm. The only way I can get out of this is to perform a hard reset with a erasure of data. I also get no useful information about the cleaning up step in the Palm Desktop log. It just tells me that the hotsync completed and the date and time.
So, my first data segment did show that it was over 64K, to my surprise, since it ran on POSE. So, I was able to lower it to 59K and I got the same results -- worked on POSE, hotsync failed on cleanup on physical device. Next, I noticed that the RAM size that POSE gave me was set to 8192K. This is obviously higher than 1952K, so I lowered the available RAM on POSE to the next lowest amount of RAM allowed, which was 1024K. With just 1024K, the app still ran properly, which it should since the app is now down to 707K in size, according to WinExplorer. Needless to say, I am out of ideas. However, I am curious about why my Palm has a max of 1952K, not 2048K or one of the available sizes on POSE. Any info is always appreciated. Regards, Daniel Suleski :-> TD, Mysticware Inc. www.mysticware.com "Dave Lippincott" <[EMAIL PROTECTED]> wrote in message news:104380@palm-dev-forum... > > What error does Pose return after the sync? (you did test on Pose, right?) > If your app responds to sysAppLaunchCmdSyncNotify, make sure its not doing > something bad when it responds. Also make sure every segment is less than > 64K. > > ----- Original Message ----- > From: "Dan" <[EMAIL PROTECTED]> > Newsgroups: palm-dev-forum > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > Sent: Monday, December 09, 2002 2:56 PM > Subject: HotSync... > > > > Hi everyone. I am trying to Hotsync an app over to my PalmIII. The app > is > > approximately 750K and when the Hotsync is operating, it gets to "Cleaning > > up - please wait" after syncing the app. At this moment, an alert box > comes > > up that is titled, "Fatal Error" and the contents says "Fatal Exception". > > Then there is just a button there to reset the whole unit, at which time, > > the Palm just appears to freeze and I have to give it a hard reset and > erase > > all of the data. > > > > Has anyone heard of this and if so, how did you fix it? > > > > Regards, > > > > Daniel Suleski :-> > > TD, Mysticware Inc. > > www.mysticware.com > > > > > > > > > > -- > > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/support/forums/ > > > > > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
