http://www.palmos.com/dev/tools/emulator/#download
Run ROMTransfer.prc and hit 'Begin Transfer", then go to the ROM Transfer screen on your desktop. USB shows up at the bottom of the list. Note that USB transfer doesn't show up as an option unless you've already hit 'Begin Transfer'.
It works great (Thanks Keith!) - I just used it this morning.
-Rodney Smith
DoIT Technology
<RealPlayer for Palm>
www.doittech.com
At 10:08 AM 1/9/2003, you wrote:
You'll need to get a serial cable. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 09, 2003 6:47 AM To: Palm Developer Forum Subject: Re: Problem using "ROM Transfer"Is this such a silly question that it bears no response, or is this the wrong place to ask? Either way, I'd be pleased to receive the feedback. Bob. Hi folks, I used to have a PalmV, and I was able to download it's ROM image to use within POSE. Recently I moved to an M500, and I have been unable to download the image. One thing I noticed is that POSE only seems set offer serial ports in its configuration, while my new synch cable is USB. This seems like a stupid problem, but I haven't been able to figure it out. I've tried looking through the Palm site docs, but still no luck. Thanks in advance. Bob.
-- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
