Just wanted to know if anyone has seen reports on m500/m515 (in particular), or
universal connector devices (in general) getting into weird states.
Here are the scenarios:
1.) Plugging vanilla device into universal connector cradle results in device getting
stuck in the "off" state. Subsequent on button presses cannot turn device on. There
is plenty of battery and no other software installed. A reset clears up the problem.
2.) (Not sure I believe this one, but it has been reported from the field). Device
gets into a state where plugging IN to the cradle results in the power button light
turning OFF, while taking it out of the cradle results in the power button light
turning ON - completely opposite of expectations. Again, a reset clears up the state.
Thanks,
Kevin O'Keefe
------------------------------------------
The information in this transmittal and any attachments are confidential and intended
only for the recipient(s) listed above. You are hereby notified that any unauthorized
distribution or copying of this transmittal or its attachments is prohibited. If you
have received this transmittal in error, please notify invivodata immediately at (831)
438-9550.
------------------------------------------
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
