Matthew: The reason I've asked, is because I'm facing a scarce supply of SpringBoard modules for the Visor. In particular, I need a large quantity of Xircom SWE1130-NA. The lack of which drives me to look for a replacement solution. Can you point me in the right direction for the specs, such that I can better asses the viability of the electrical connections of the Memplug CF - a SpringBoard to CF adapter (manufactured by Pitech, http://www.pitech.com/hardware/CF/CF_index.htm)? Thanks, Gabriel.
"Matthew Bevan" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > > > Does it work? > > Using a generic CF card adapter on a Visor, you are unable to use any card > save storage. All complex CF cards (such as modems, wireless, cameras, > sensor packages, etc.) require driver software and/or electrical connections > that are not made. > > > Are there other CF WLAN adapters suitable for the Palm OS platforms? > > You could likely develop your own driver software, if given the complete spec. > Also, you would need a device capable of using non-storage cards. These > systems are rare, as the drivers are as well. > > It would be much simpler to simply buy a hand-held with built-in wireless. > > A more complex solution, if you are bent on using CF cards, is the Sharp > Zaurus. Using the Zaurus and an emulated Palm device, you could redirect > Palm TCP/IP to the CF card's network connection. A much more expensive > solution, however. > > -- > Matthew (Darkstorm) Bevan [EMAIL PROTECTED] > Margin Software, NECTI. http://www.marginsoftware.com > Re-inventing the wheel, every time. > > - Boston, n.: > Ludwig van Beethoven being jeered by 50,000 sports fans for > finishing second in the Irish jig competition. > > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
