> See Message #85437 in this forum that I posted. looking at the thread that followed your post, there was quite a bit of 'justifiable' knowledge been thrown your way; probably more than you'll get from someone inside palmsource in such short notice.
did you try setting your timeout to a non -1 number? if the problem is with SrmRecieveCheck(), bypassing it with a small timeout value could solve your problems as well. as for why it may work differently on T|T, Rob Larson pointed it out smack on the dot. your dealing with different CPU, different UART's and.. these things happen.. functionality can change from one set of hardware to the next - you should not be depending on such timings in your application really. i would recommend you go back and re-read some of the responses that were posted to your original question, and, you might see some light ;) --- Aaron Ardiri [EMAIL PROTECTED] CEO - CTO +46 70 656 1143 Mobile Wizardry http://www.mobilewizardry.com/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
