I can't get debugging from CW working on a real device. I have tried all things I have found about putting the device in console mode (shortcut .. 2 and holding various scrollbuttons while doing a reset). The device is a m515 and I use CW version 8.x. Shortcut .. 1 works though and shows a green bar at the botton of the screen. In CW I have Palmdebugger settings to Palm OS device and USB connection. What is wrong and what should I see on the device screen once I enable the correct mode?
We can't talk to the m515 over USB. This device was released after the V8 product came out, and in our tests, we were not able to get a USB debugger connection working. Other Palm devices that don't work with our debugger over USB include the i705 and m130. The m500, m505, and m125 all do work, as best we can tell.
You'll need to get a serial cable and use that to debug to the m515. -- Ben Combee <[EMAIL PROTECTED]> CodeWarrior for Palm OS Technical Lead, Metrowerks For programming help, see http://www.palmoswerks.com/
-- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
