Palm-meisters, I'd appreciate your help with the following. I am trying to integrate the Zire 71's camera with my own application. I have cut and pasted bits of the sample application from the Palm SDK into my own. What I find is that the camera works - once. When I install everything fresh, and turn on the camera by opening the slider, I can take and save pictures. However, if I turn off the camera by closing the slider, return to the rest of my application, and then open the slider again, I usually get a crash. Sometimes I also get the following error message:
Fatal Alert: Emul68KMain.c, Line:403, illegal instruction 19F0 at address 00000002 It would be helpful to know if this message should point me in any particular direction. I though there might be a problem with registering and unregistering for slider notifications, or with loading and unloading the camera library. Also, I should note that with the addition of the camera code my application has grown to be more than 32K in size (its about 37K, without the addition of armlet resources). My understanding is that this might cause the application to fail to compile, but that if it does compile, it shouldn't cause crashes. But maybe I'm wrong. Your assistance much appreciated. Matthew Fleming -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
