Have you tried your app on Pose running a VII debug ROM?  Could this be a
problem on this specific VII?  Has any other customers with a VII reported
similar problems?
I personally have not experience any VII specific serial issues.  But I do
not work at 115K baud.  Is it possible to test using a slower baud rate?

----- Original Message -----
From: "fftlaser" <[EMAIL PROTECTED]>
To: "Palm Developer Forum" <[EMAIL PROTECTED]>
Sent: Monday, July 07, 2003 3:49 PM
Subject: Palm VII RS232 Situation


> Hmmm, original post in 1/28/03.  Dave's response on 1/29/03.  And I'm just
>  getting back to this issue.  Needless to say I've been off on a tangent.
>
>  Details.  The application I've written uses the RS232 port to communicate
>  with custom hardware either directly attached to the port or attached
>  through a sync cable.  Communication is at 115.2kBd, 8-1-none, auto RTS
and
>  auto CTS.  The Serial Link Manager functions are used to handle data
>  transmission and reception.
>
>  The application runs just fine on Palm III and Palm V handhelds under OS
>  3.3, 4.0 and 5.0.  I've even run the application with no problems on a
>  Kyocera phone.  The handheld (phone) and the external hardware chat away
>  with ease.  The application has communication problems when run on a Palm
>  VII handheld.  Unfortunately, I do not have a Palm VII handheld to run
the
>  code on, and am relying on feedback from an end user to try and
> troubleshoot
>  this situation.  Also unfortunately, I can find no useful information on
> the
>  Palm software and hardware websites that provide any clues as to any
>  idiosyncrasies the Palm VII handheld might enjoy.
>
>  I have no details other than these to provide.  Just looking for feedback
> on
>  any idiosyncrasies of the Palm VII RS232 port.  Something I have to turn
> off
>  before using this port. Which foot I have to stand on?  What tune I have
to
>  whistle?  ????????
>
>  Thanks for the assistance.
>  tom
>



-- 
For information on using the Palm Developer Forums, or to unsubscribe, please see 
http://www.palmos.com/dev/support/forums/

Reply via email to