Re: Printing from Palm in Okidata

[Roger Stringer]

Subject: Re: Printin from Palm in Okidata
From: [EMAIL PROTECTED]
Date: Mon, 22 Sep 2003 08:35:37 -0700
We are printing successfully from our app to an Epson LX300 Plus, using:

9600 bps
8 bits data
1 bits stop,
0 bits parity,
The problem is that we cannot print to Okidata Microline 320 turbo, with
the SAME settings.
Any ideas ?
Anybody succesfully using this printer ?
One of my PDE customers is using the 320 printer with the following 
settings (to the printer) with our default Serial Manager-based print driver.

Serial I/F Opt
        Parity          None
        Serial Data     8
        Protocol                Ready/Busy
        Diag Test       No
        Busy Line       RTS
        Baud Rate       9600
        DSR Signal      Valid
        DTR Signal Rd   Pow Up
        Busy Time       200 ms
However, they had to disable CTS checking.

Roger Stringer
Marietta Systems, Inc.  (www.mariettasystems.com)
--
For information on using the Palm Developer Forums, or to unsubscribe, please see 
http://www.palmos.com/dev/support/forums/