It would seem best to use a straight TCP/IP based connection between the
units and the PC. You could install the Softick PPP software with USB, or
buy an Ethernet cradle.
Subject: Re: [Fwd: usb ?]
From: "David Temes" <[EMAIL PROTECTED]>
Date: Wed, 7 Jan 2004 15:30:08 +0100
May be getting a serial cradle is not a bad idea, the cost of this piece of
hardware will be for sure lower than the cost of development if you plan to
use usb....
--
David Temes
"Riccardo Cohen" <[EMAIL PROTECTED]> escribi� en el mensaje
news:[EMAIL PROTECTED]
> Flex wrote:
> > Yea, USBPort.dll, sorry :)
> >
> > The sockets are universal, they'll work on nearly all the devices. But
> > there are 2 problems:
> > 1. The sockets are not very fast... compared with the usb
>
> should be faster than serial
>
> > 2. How will "connect" them? I mean on Tungsten W and Treos you can use
> > the gsm module, On T|3 - the bluetooth, on T|C the WiFi but the rest of
> > them? Ir?
> >
>
> all I want is connectiong the palm with the PC. Can I use socket through
the cradle ?
Roger Stringer
Marietta Systems, Inc. (www.mariettasystems.com)
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
