I'm not sure it has. I assume you are referring to the OMAP issues... This is not an OMAP issue. This is an issue of code working on one non-OMAP device and then not working on any other non-OMAP device.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dave Lippincott Sent: Wednesday, July 21, 2004 10:49 AM To: Palm Developer Forum Subject: Re: Raw IR and the Zire 72 The answer has been posted to the communications forum. I also think its in the Palm Knowledge Base. ----- Original Message ----- From: "Kevin OKeefe" <[EMAIL PROTECTED]> To: "Palm Developer Forum" <[EMAIL PROTECTED]> Sent: Wednesday, July 21, 2004 1:08 PM Subject: RE: Raw IR and the Zire 72 I have a similar problem. I have a raw IR application that works on the TW, but works on no other Palm OS device.... Kevin -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of jhillman1 Sent: Thursday, July 15, 2004 6:04 PM To: Palm Developer Forum Subject: Raw IR and the Zire 72 I have several applications that open the serial port in the IR mode that run great on the M500 series but fail on the new Zire 72. Any thoughts? Jesse -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ ------------------------------------------ The information in this transmittal and any attachments are confidential and intended only for the recipient(s) listed above. You are hereby notified that any unauthorized distribution or copying of this transmittal or its attachments is prohibited. If you have received this transmittal in error, please notify invivodata immediately at (831) 438-9550. ------------------------------------------ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
