Hi Joe, That code mades sense. Unfortunately I have a CDMA phone which supports 1xRTT. I will have to see if I have an equivalent function for that service.
Thanks for the code snippet. Marty -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of joe bloggs Sent: Tuesday, August 10, 2004 3:50 PM To: Palm Developer Forum Subject: Re: Treo 600 auto turn on wireless mode Below is a code snipet of how I got PhnLibSetModulePower to work for me. Maybe it will help you. Note, I used HsGetPhoneLibrary to get a reference to the library. Also note that I am turning on the phone to allow the app to connect to the Internet (hense the call to my function SndProcessConnection()) Cheers, Joe ... // Check if phone is on. if (!PhnLibModulePowered (PhoneLibRefNum)) { // If phone is off, turn it on PhnLibSetModulePower (PhoneLibRefNum, true); } while (!PhnLibGPRSAttached (PhoneLibRefNum)) { if (powerOnCounter > MAX_POWER_COUNT) { ErrThrow (FsaErrNoNetworkCoverage); } powerOnCounter ++; } err = SndProcessConnection (); ... "Martin Bruner" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > That's what PhnLibSetModulePower is suppose to do, but I haven't got it > running completely. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Keyur > Patwa > Sent: Tuesday, August 10, 2004 2:08 PM > To: Palm Developer Forum > Subject: RE: Treo 600 auto turn on wireless mode > > > Hey Marty, > > Thanks, it works! > > But as u know it pops up a message box asking if the user wants to turn the > w/l mode on! Is there any way to turn it on without any user interaction, I > mean without asking for the user confirmation? > > Let me know if it is possible! > > Thanks again, > Keyur > > -------------------------------- > > -----Original Message----- > From: Martin Bruner [mailto:[EMAIL PROTECTED] > Sent: Tuesday, August 10, 2004 1:28 PM > To: Palm Developer Forum > Subject: RE: Treo 600 auto turn on wireless mode > > I noticed that when I use PhnLibSetModulePower and attempt to open the > serial port, I get a hsErrRadioNotRegistered error. So I have been using > HsTurnRadioOn(); > > Marty > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Keyur > Patwa > Sent: Tuesday, August 10, 2004 9:50 AM > To: Palm Developer Forum > Subject: RE: Treo 600 auto turn on wireless mode > > > Hi guys, > > I was going through all of your emails regarding this matter as I am also > willing to turn the wireless mode automatically, programmatically and > without any user interaction. > > I find all the functions u were mentioning but don't find any documentation > about which function does what and that confuse me a lot. > > Can u tell me WHAT sequence of WHICH function calls should I follow to get > this thing done? > > Right now I am just calling PhnLibSetModulePower (refNum, true); but it > doesn't turn the w/l mode on. I am opening and getting the reference number > of the library correctly as I am already using it to get the IMEI number > programmatically. > > Please reply and help, > Keyur. > > > > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/support/forums/ > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/support/forums/ > > > > -- > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/support/forums/ > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
