Codewarrior is definitely compatible. You probably just need to upgrade your SDK. You will need a newer SDK to use the Dynamic Input Area on the T3 and T5.
It's been a while since I installed CW or the SDK, so I can't recall the exact steps required. But go to http://www.palmos.com/dev/tools/core.html, and you'll see a link to "Palm OS SDK". You'll need to register and login to download it. I'm running CW9.3 with the Garnet R3 SDK, and it works fine. Not sure if CW9 is required to run this SDK, but might be worth upgrading regardless. Just one word of caution... make sure you carefully read all release notes if you're upgrading CW. I remember that it did not install 100% cleanly for me, and I had to do some manual steps to get all of the files in the appropriate places. Fortunately it was well documented in the release notes. Cheers, Mark Cameron Techneos Systems -----Original Message----- From: fwhandojo [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 08, 2005 9:50 PM To: Palm Developer Forum Subject: What software to develop application for Tungsten T3? What can I use to make applications for the Tungsten T3? Is Codewarrior compatible with the T3? I have the v8.0 demo of CW, but I'm having problems loading the application into the device. -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
