"When debugging with Palm OS Garnet devices, the Palm OS Debugger's ARM Palm OS 5 Debug Nub plug-in communicates through the serial connection with the ARM Debugger Nub for Palm OS Garnet on the device."
My device is Tungsten E. It does not *have* a craddle with a serial cable. It connects to the PC with a USB cable. But earlier, the documentation says
This only applies to debugging ARM code. To debug 68K code, the USB connection on the Tungsten E will work fine. You'll need PODS or CW for Palm OS V9.3 in order to handle this OS 5 device correctly.
Then again the PalmOS documentation says to type some special shortcut on the device:
"NOTE: To draw the debugging shortcut, follow these steps:
1. Draw the lowercase, cursive "L" character. 2. Tap the stylus twice, to generate a dot (a period). 3. Draw the number 2."
Download the "DotDotTwo" sample program from the PalmSource KB and use that to enter debug console mode. It's much easier and more reliable than entering the strokes.
-- Ben Combee, Senior Software Engineer, palmOne, Inc. "Combee on Palm OS" weblog: http://palmos.combee.net/ Developer Forum Archives: http://news.palmos.com/read/all_forums/
-- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
