On 2005-06-21, Matthew D Moss <[EMAIL PROTECTED]> wrote: > I recently installed PODS and built a simple "hello world" app to test > tools, connection, etc. After a few minor glitches I was able to debug on > the device through the Eclipse debug perspective. > > Now, my Palm is sluggish at times (usually power on/off) and cannot hotsync > over usb(because the "port is in use"). I take it this is because PODS must > have installed a "debug nub" (or something?) to make debugging as easy as it > was. > > I'm glad that I can debug so easily on device; but is there as easy a way to > temporarily disable the nub so I can hotsync over usb?
You will have to get the device to close the debug port (that is why you get USB port in use). The only way (I know) to do this is by soft-resetting the device. Also when the debug port is conyinuously open, you will drain the battery faster. The sluggishness is caused by the console handler code executing, listening for a command all the time in the background. So, soft-reset and the slugghishness should disappear and you should be able to HotSync again via USB. HTH Ton van Overbeek -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
